Advancing Manufacturing Technology

Project Webinars and Reports

Project Webinars

These webinars are for iNEMI members only (unless otherwise noted)

Ultra Low Loss Laminate/PCB for High Reliability and Performance End-of-Project Webinar (March 7/8, 2017)

Connector Reliability Test Recommendations End-of-Project Webinar (April 6-7, 2016)

Automotive Electronic Material Challenges End-of-Project WebinarRecording (35 mins) (March 17, 2016) (available to both members and non-members)

Metals Recycling (August 27, 2015) (available to both members and non-members)

Alternative Materials Assessment End-of-Project Webinar, also paper and benchmarking of tools (August 25, 2015) (available to both members and non-members)

Recent Trends of Package Warpage Characteristics, iNEMI Warpage Characterization Project Phase 2 Completion Webinar (May 22, 2015)
Metals Recycling (July 8, 2014)
 
Alternative Materials (June 26, 2014)

Repair & Recycling Metrics (June 25, 2014)
 
Boundary Scan, Phase 2 (May 7, 2014)
 
Copper Wire Bonding, Phase 2 (March 27, 2014)
 
Pb-Free Rework Optimization, Phase 3 (March 12, 2014) (available to both members and non-members)
 
PCBA Reliability Qualification (February 27-28, 2014) (available to both members and non-members)
 
Counterfeit Components (October 15, 2013)
 
Creep Corrosion, Phase 3 (November 5-6, 2012)
 
Eco-Impact Evaluator, Phase 2 (LCA Estimator for ICT Products) (October 17, 2012)
 
Structural Test of External Memory Devices (Boundary Scan Adoption Project, Phase 2) (May 24, 2012)
 
HFR-Free PCB Materials (February 21, 2012)
 
Built-In Self-Test (BIST), Phase 2 (December 14, 2011)

PVC Alternatives (October 4, 2011)
 
Board Coplanarty in SMT (August 23, 2011)
 
Board Flexure Standardization (August 4-5, 2011)
 
Pb-Free Wave Soldering, Phase 2 (October 14, 2010)
 
Solder Paste Deposition, Phase 1 (October 13-14, 2010)
 
Boundary Scan Adoption Project (October 20, 2009)
 
Nano-Solder Project (February 4, 2009)
 
Nano-Attach Project (December 17, 2008)
 
DPMO Project (February 16, 2005)
 

Final Reports

These webinars are for iNEMI members only (unless otherwise noted)

PVC Alternatives Interim Report (November 30, 2010)
 
iNEMI Tin Whisker Team End-of-Program Report, Richard Parker (Delphi), presented at iNEMI Fall Council meeting (October 28, 2010; Orlando, Florida)
 
BFR-Free PCB Project, Phase II (Material Evaluation) (August 8, 2008)
 
Lead-Free Assembly Project (December 2003)