Advancing Manufacturing Technology

Research Seminar Series

2017 Research Webinars

Knowledge Based Qualification:  Meeting Challenges of New Markets and New Technologies, presented by Milena Vujosevic, Intel Corporation (October 19, 2017)



2016 Research Webinars

What is the Critical Materials Institute; presented by Alexander H. King, Director, Critical Materials Institute (January 28, 2016).  Recording

Five-Step Methodology for Assessment of Sustainable Technologies, presented by Mike Ashby and Tatiana Vakhitova, Granta Design, University of Cambridge (November 3, 2016).  The link is for iNEMI members only (you must be logged in as a member to view).  Non-members should contact info@grantadesign.com to obtain the presentation.


 

2015 Research Webinars

Jetting as an enabling technology, presented by Gustaf Mårtensson, Mycronic (February 18, 2015)
 
The iNEMI-MIT Photonic Systems Manufacturing Consortium (PSMC):  Accomplishments and Next Steps, Professor Lionel Kimerling, Director, MIT Microphotonics Center (February 19, 2015)
 
Corrosion Concerns & Testing for Electronic Equipment, Dr. Michael Osterman, CALCE (April 30, 2015)
 

2014 Research Seminar Series

Research Seminar 1: MEMS

MEMS R&D at Léti: Our Vision and Roadmaps, Jean-Philippe Polizzi and André Rouzaud of CEA Léti (March 31/April 1, 2014)
Recording


Research Seminar 2:  Circuits in Plastic

Circuits in Plastic - Addressing the Major Issues in Creating a Sustainable Electronics Industry, presented by Professor David V. Thiel of Griffith University (Australia) (April 21, 2014) (For iNEMI members only...you must be logged in as a member to view)
Done Lamp – movie        Recording
 

Research Seminar 3:  Printed Electronics

Printed Electronics - Manufacturing Technologies and Applications (with a Focus on Aerosol Jet Printing) (with video), presented by Dr. Chuck Zhang, Georgia Institute of Technology (May 12, 2014)     Presentation (with video) (49 MB)      Presentation (without video)       
Recording
 

Research Seminar 4:  End-of-Life Phase of Consumer Electronics

End-of-Life Phase of Consumer Electronics - Methods and Tools to Improve Product Design and Material Recovery, presented by Jennifer Mangold, University of California, Berkeley (June 11, 2014)          Recording
 

Research Seminar 5:  3D Printing & Additive Manufacturing

3D Printing & Additive Manufacturing - Innovation, Challenges & Opportunities, presented by Simin Zhou, UL (August 14, 2014)
 

Research Seminar 6:  The National Additive Manufacturing Institute's Mission and R&D Portfolio

The National Additive Manufacturing Innovation Institute's Mission and R&D Portfolio, presented by Ed Morris, Director of America Makes and Vice President, National Center for Defense Manufacturing and Machining (October 9, 2014)
 

Research Seminar 7:  SUNY Binghamton Research Webinar on Flexible Electronics

The Electronics Packaging and Flexible Electronics Centers at Binghamton University, presented by Daryl Santos, Director, Integrated Electronics Engineering Center (IEEC) (November 20, 2014)

Flexible Electronics from Silicon Wafers to Flexible Plastic, presented by Mark D. Poliks, Technical Director, Center for Advanced Microelectronics Manufacturing (CAMM)  (November 20, 2014)       Recording of both presentations
 

Research Seminar 8:  Medical Device Innovations by Miniaturization

Medical Device Innovations by Miniaturization, presented by Erik Jung, Fraunhofer IZM (December 11, 2014)     Recording